The apartment has a room made of Aeroc D400 gas block 100x200x610. On one of the walls, you had to hang a TV (65") on a bracket and a cabinet under it (180 cm x 30 cm x 33 cm).
A metal dowel/anchor (different stores have different) for aerated concrete/foam concrete/gas block/foam block (different stores have different) (crocodile in some stores) turned out to be a fairly reliable and budget option.
дюбель залізний для газоблоку
An 8x60 dowel (a 5-6mm screw is recommended for it) and a 6x60mm screw (a turnkey screw is popularly called a lag screw) fit the 100mm wall.
шуруп / гвинт по дереву (для лаг)
What was needed:1. Hammer2. Dowel for gas block 8x60mm3. 8mm concrete drill and tool (perforator or screwdriver)4. Screw 6x60mm on wood6. Key 10mm to screw the screw
Procedure:1. Drill (very carefully and slowly. if the perforator - turn off the reflectance mode)2. We drive the dowel with a hammer3. We fasten the desired element to the wall using a screw.
Our experience:Xiaomi 1PE 65 TV (18.4 kg) + RZTK TVM 16-80 TV bracket are supported by 7 dowels. There is no doubt about the strength of the fastener.
The hanging cabinet is 180 cm wide (I don't know the weight) and is supported by 16 dowels (4 fasteners of 4 dowels each).
Without a doubt, these dowels are suitable for attaching furniture to gas block walls. But do not forget to check the technical documentation of your gas unit to understand what load it can withstand.
Of course, this is not the only type of dowels for gas blocks. But this is one of the budget and reliable options that is available in almost all local hardware stores.
