This content has been automatically translated from Ukrainian.
I printed a holder / stand for glasses as a gift. Here is the link to the model on Makerworld https://makerworld.com/en/models/421625-sun-glasses-holder-nose-for-flat-surface#profileId-324523
The process is as follows:
- We print the model
- We find a board (in my case, a leftover from the trim)
- We process the wood
- We attach the loop (mounting for the frame)
- We glue the models
Regarding the wood processing. I burned the board and covered it with varnish. Below I will add photos of the process.
The nose is printed with supports. They need to be removed carefully.
I think it's pointless to explain each photo.
This post doesn't have any additions from the author yet.
![[P1S] Message on the screen - Z-axis lead screw needs lubrication](https://d3kb0xa9zqcv9v.cloudfront.net/n2484aszggdtb76vwovcelpt4vag)
![[PrintArmy] The first 50kg of printed products for the military](https://d3kb0xa9zqcv9v.cloudfront.net/ud1y2vcjnjrg51pw18ljubptwmgd)
![HMS error: 0300-0d00-0002-0001 what does it mean and how to fix it? [P1S]](https://d3kb0xa9zqcv9v.cloudfront.net/0wi0y60gycmr9yktq6uss8vyao12)
![[Bambu P1S] Electricity consumption for ~15 hours of printing](https://d3kb0xa9zqcv9v.cloudfront.net/1gmes1a8hnxxq1fi2xzihjbf31zn)
